Mazda MX5 - Service Manual 2004
Short Description
LUBRICATION. 01-11-3. 01-11. OIL FILTER REPLACEMENT. A5U011114300W01. 1. Remove the oil filter using the SST. 2. Use a clean rag to wipe off the mounting …
Website: roykop.co.uk | Filesize: 50kb
Content
LUBRICATION
01-11-3
01-11
OIL FILTER REPLACEMENT
A5U011114300W01
1. Remove the oil filter using the SST.
2. Use a clean rag to wipe off the mounting surface
on the oil filter body.
3. Apply clean engine oil to the O-ring of the oil filter.
4. Using the SST, tighten the filter according to the
installation direction on the side of it or packing
box.
5. Start the engine and inspect for oil leakage.
6. Inspect the oil level.
?Add oil if necessary. (See 01-11-2 ENGINE
OIL LEVEL INSPECTION.)
End Of Sie
OIL PRESSURE INSPECTION
A5U011102000W01
Warning
?Continuous exposure to USED engine oil has caused skin cancer in laboratory mice. Protect your
skin washing with soap and water immediately after working with engine oil.
?Hot engines and engine oil are hot, they can cause burns. Turn off the engine and wait until it and
engine oil have cooled.
1. Remove the oil pressure switch.
2. Screw the SST into the oil pressure switch
installation hole.
3. Warm up the engine to normal operating
temperature.
4. Run the engine at the specified speed, and note
the gauge readings.
?If the pressure is…
Get the file Download here
Related Searches: oil pressure switch, mazda mx5, gauge readings, laboratory mice, oil leakage
Comments
Leave a Reply
