Apple iPhone (4 & 8GB variants) Carrier AT&T Vehicles compatible …

Short Description
For details please see the vehicle user’s manual. … Type in a 4-16 digit passkey on the iPhone first (on some BMW models like X3, Z4 and 7 …

Website: www.wireless4bmw.com | Filesize: 437kb

Content
8/3/2007
Apple iPhone (4 & 8GB variants) Carrier: AT&T
Vehicles compatible: Produced after:
3-series Sedan March 2005
3-series Touring June 2005
3-series Coupe June 2006
3-series Convertible December 2006
5-series Sedan September 2004
5-series Touring September 2004
6-series Coupe September 2004
6-series Convertible September 2004
7-series March 2005
X3 September 2006
Z4 October 2006
X5 October 2006
Software tested: 1.0 (1A 543a) & 1.0.1(1C25)
To find the software version: On the Home screen touch Settings General About
Pairing Instructions:
1. Please set the vehicle in pairing mode. For details please see the vehicle user’s manual.
2. On the Home screen touch Settings General Bluetooth
Your phone will display a list of any Bluetooth device(s) that it discovers in range and
available to be paired.
Select the name of the Bluetooth enabled device (e.g. BMW34001) with which you are
pairing. Please note that the Bluetooth enabled device name may first appear as
“Handsfree”.8/3/2007
3. Type in a 4-16 digit passkey on the iPhone first (on some BMW models like X3, Z4 and 7
series the passkey that is required for this step is fixed. See the car manual for the passkey.
On all other cars the 4-16 digit passkey can be selected by the user)
Touch “Connect”
4. Then the Confirm Passkey dialog appears in the display of the car:
Repeat the passkey that was used on the device to authenticate the iPhone and press
Confirm passkey.
If pairing procedure failed (i.e. passkey mismatch between iPhone and car kit), go to
Settings General Bluetooth on iPhone and turn OFF Bluetooth and ON again. Redo
the pairing procedure….