INSTALLATION INSTRUCTIONS VOLKSWAGEN JETTA & GOLF (1994-99 …
Short Description
VOLKSWAGEN CABRIO (1998-99). (Old body style only). PART NUMBER: VW-50-94. Pro.Fit. logo and part number will be right side up and readable when installed. …
Website: www.tss-radio.com | Filesize: 147kb
Content
INSTALLATION INSTRUCTIONS
VOLKSWAGEN JETTA & GOLF (1994-99)
VOLKSWAGEN CABRIO (1998-99)
(Old body style only)
PART NUMBER: VW-50-94
Pro.Fit logo and part number will be right side up and readable when installed.
TOOLS REQUIRED: Hook tool, #1 Phillips screwdriver.
PARTS INCLUDED: Pro.Fit VSMTM, instructions.
LOCATION: To the right of the climate control.
STEP 1.
Begin by removing the bezel that surrounds the climate control
switches. To do this, insert the hook tool between the
dash pad and the bezel in the upper right corner of the bezel.
Make sure the hook tool is hooked behind the bezel and pull
toward you releasing one (1) clip. Perform this same action
in the remaining three corners releasing three (3) more clips.
Set the bezel aside.
STEP 2.
Locate and remove two (2) screws to the right of the farright
climate control switch using the #1 Phillips screwdriver.
STEP 3.
Place the Pro.Fit VSMTM over these two screw holes making
sure both holes are aligned. Insert the factory screws and
tighten.
STEP 4.
Replace the trim bezel securing all clips. Install the hang-up
cup onto the Pro.Fit…
Get the file Download here
Related Books:Related Searches: volkswagen cabrio, phillips screwdriver, volkswagen jetta, hook tool, screw holes
Comments
Leave a Reply