Suzuki Adjustable Cam Sprocket Instructions SA-S-750 (GSXR-600 …

Short Description
Suzuki Adjustable Cam Sprocket Instructions: … a factory repair manual. You may also want to check the stock cam location with a –. degree wheel. …

Website: www.mpsracing.com | Filesize: 108kb

Content
Suzuki Adjustable Cam Sprocket Instructions:
SA-S-750 (GSXR-600 & GSXR-750) Early
SA-S-1300 (GSX1300 R)
The GSXR has a ball bearing behind each cam sprocket. Press the original sprocket off
but leave the bearing on. You’ll notice that a line has been stamped on the end of each
camshaft at the factory. Line up one of the adapter’s 6mm threaded holes with the line
and press the adapter on. Caution: make sure you press the adapter on the right way
(with the larger of the two steps facing outwards). Make sure you are pressing the
adapter on squarely to the cam. When pressing on an adapter, support the camshaft
securely and squarely by the flange behind the ball bearing. DO NOT just stand the
cam on its end and press. Failure to do this will result in damage to the cam and the
adapter. You may want to slightly G.T.A.W. weld a spot or two to secure the adapter to
the cam. This will insure no future movement. DO NOT OVERWELOl Check for any
clearance problems before starting the engine! When installing the sprockets, the
intake sprocket is installed with…