Studio 204 Tutorial Setting up the VX2100 1 I. Unpacking 1. Open …

Short Description
Open the Sony camera case by flipping both chrome latches. 2. Release the Velcro strap that holds the camera on the top shelf of the case. …

Website: studio204.tlt.psu.edu | Filesize: 109kb

Content
Studio 204 Tutorial - Setting up the VX2100
Studio 204 . Copyright 2005, The Pennsylvania State University 1
I. Unpacking
1. Open the Sony camera case by flipping both chrome latches.
2. Release the Velcro strap that holds the camera on the top shelf of the case.
3. Grabbing the handle, lift the camera out of the case and place it to the side.
4. Remove the top shelf of the case by pulling each of the two handles on
either side of the shelf. Place the top shelf out of your way.
5. Take the AC power adapter and US cord from the bottom of the case.
6. Replace the top shelf and close the camera case, securing the latches.
II. Setting Up with Tripod
1. Open storage closet and remove one tripod.
2. Place the tripod in the area where you will be shooting your video.
3. Pull each leg of the tripod open to its full, spread extension and then turn
the tripod so one leg is pointing towards your subject.
4. Attach the camera to the top of the tripod, tightening the thumbscrew
securely.
5. Raise the legs of the tripod so the camera is level…