How to hardwire the Olympus D-370 and D-380 Digital Cameras

Short Description
your Olympus camera that you will void your camera’s warranty. Tools Needed. a. 2.4 mm #0 Philips Screwdriver & Small Flat Blade Screwdriver. …

Website: www.camerahacker.com | Filesize: 590kb

Content
How to hardwire the Olympus D-370 and D-380 Digital Cameras
Copyright 2002, PixController http://www.PixController.com, all rights reserved.
This document covers in detail how to modify either the Olympus D-370 or D-380 Digital Camera
so that the shutter can be controlled remotely. Please note that if you make this modification to
your Olympus camera that you will void your camera’s warranty.
Tools Needed
a. 2.4 mm #0 Philips Screwdriver & Small Flat Blade Screwdriver.
b. 3/16″ Drill Bit and Drill.
c. Soldering Iron with a small tip.
d. (3) 6″ 24 Gauge Wires.
1. Remove the Camera Batteries and SmartMedia Card
Before you begin to modify your camera you need to make sure you remove the batteries and the
SmartMedia card from the camera. If you leave them in you can damage your camera or the
media card. Note Figures 1 and 2 for the location of the 4 AA Batteries and the SmartMedia card.
Figure 1 Figure 2
2. Remove the Screws
The next step is to remove the screws from the camera case. There are a total of 7 small screws
to remove from the camera body. Note the…