BMW E36 3-SERIES

Short Description
BMW E36 3-SERIES. TOOLS NEEDED: Safety glasses, two 13mm wrenches or …. 1992-99. BMW E36 M3, 328 i/is, 325 i/is models. Exhaust System. PN 14552.

Website: www.corsaperf.com | Filesize: 1471kb

Content
Exhaust System Removal:
1. Using two 1/2″ wrenches, remove the four flange bolts (See Fig A & B).
2. Carefully remove the seal ring and save (See Fig. C). The ring will be used
later during the installation of the CORSA system.
3. Remove the nuts located at the rear muffler section, (See Fig. D & E) using
a 1/2″ socket.
4. Slide the muffler assembly back and then downward to fully remove the factory
system. (See Fig. F & G). Continue to Step 5 on page 2.
BMW E36 3-SERIES
TOOLS NEEDED: Safety glasses, two 13mm wrenches or
two 1/2″ wrenches and 1/2″ socket
PARTS LIST: (1) Muffler and tip assembly, (4) 8mm-55mm Hex Head Bolts, (4) 8mm nuts
1 CORSA Performance ?140 Blaze Industrial Parkway ?Berea, Ohio 44017-2930 ?P. 800.486.0999 ?F. 440.891.1868
E - m a i l : s a l e s @ c o r s a p e r f . c o m ?c o r s a p e r f o r m a n c e . c o m
INS5044…