SmartMAP Model SM-300-xxx Installation Instructions

SmartMAP  Model SM-300-xxx Installation InstructionsShort Description
Honda/Acura turbo and supercharger kits and prevents the engine computer (ECU) from … Using the electrical service manual for your vehicle, locate the MAP …

Website: www.zublin.com | Filesize: 134kb

Content
SmartMAP. Model SM-300-xxx
Installation Instructions
Basch Acura Service
4202 E. McDowell
Phoenix, AZ 85008
Contact: Mark Basch
Office: (602) 244-8010
Email: baschacura@aol.com
Designed and manufactured by Zublin Engineering
16212 Paragon Mesa Road
Poway, CA 92064
Contact: Bryan Zublin
Email: bzublin@zublin.com Web page: www.zublin.com
Phone, night & weekends: (858) 391-1322
Phone, daytime: (858) 404-2724
Copyright 2002 Zublin Engineering Document 900028 rev 1.0 April 26, 2002
This document is available as an electronic file in Adobe Acrobat (pdf) format with color images from www.zublin.com. This document may be
freely copied and distributed provided that it is done so in its entirety. Any change, modification or editing is strictly prohibited without the
written permission of Zublin Engineering.2
What is the SmartMAP.?
The SmartMAP. model SS-300 replaces the check valve and restrictor assembly used by most
Honda/Acura turbo and supercharger kits and prevents the engine computer (ECU) from shutting down
the engine when the manifold pressure is above atmospheric (boost).
How does the SmartMAP. work?
The SmartMAP. connects inline with the stock (OEM) manifold absolute pressure (MAP) sensor and
limits the MAP voltage that is applied to the ECU. The limit (clamp) voltage value is preset and can not
be adjusted.
The stock Honda/Acura NSX MAP sensor has an output range of about 0.5V at high vacuum to about
2.7V at atmospheric pressure (wide open throttle for normally aspirated NSX’s). With a turbo or
supercharger installed, the manifold pressure will increase above atmospheric, and the MAP sensor
voltage will rise above 2.7V. At some voltage above 2.7V, the NSX ECU will assume that there is a
problem with the sensor and shut off the engine, since under normal conditions (without the turbo/SC),
the MAP output will never exceed about 2.7V. The SmartMAP model SM-300-275 prevents the ECU
from shutting…

Get the file Download here

AddThis Social Bookmark Button
Related Books:
  • SmartMAP Model SM-300-xxx Installation Instructions
  • INSTALLATION amp OPERATING INSTRUCTIONS VWAudi Quick Fit Rallye 4 …
  • INSTALLATION amp OPERATING INSTRUCTIONS BMW E36 amp E46 3 Series BMW …
  • SmartShift T Model SS-301 Installation Instructions
  • SUZUKI WINCH KIT Installation Instructions KIT NUMBER 20-4080
  • HONDA WINCH KIT Installation Instructions KIT NUMBER 20-1081
  • Ford Lightning Fuel Rails Installation Instructions
  • INSTALLATION & OPERATING INSTRUCTIONS BMW E36 & E46 3 Series BMW …

  • Related Searches: , , , ,



    Comments

    Leave a Reply