60-66 Tech tips
Short Description
BMW. HARD SHIFTS/LEAK AT TORQUE CONVERTER SEAL. Affected Models:. . Z3 with GM5 from 6/00 up to …. outlined in the appropriate service manual, it will be …
Website: www.import-car.com | Filesize: 321kb
Content
TOYOTA
STEERING RETURN FEELING/RACK GUIDE REPLACEMENT
To provide a smoother steering return feeling on
1998-2000 Siennas, the steering rack guide has been
changed. Use the following procedures to solve this
problem upon customer complaint.
Power Steering Gear Removal:
1. Mark the outer tie rod ends/tie rod lock nut and
the inner tie rod prior to removing the steering gear.
2. Mark the intermediate shaft to the steering rack
pinion shaft (control valve shaft) prior to removing
the steering gear.
3. Disconnect the clamp plate attached on the
steering gear.
4. Disconnect the steering pressure lines from the
steering gear.
Steering Rack Guide Replacement:
1. Using SST 09922-10010, remove the rack guide
spring cap lock nut.
Note: Use SST 09922-10010 in the direction shown
in Fig. 1.
2. Remove the rack guide spring cap, rack guide
spring and rack guide subassembly.
a. Using SST 09612-10022 and a 21 mm box end
wrench, remove the cap.
b. Remove the spring and rack guide.
3. Install a new rack guide subassembly. Reuse the
original rack guide spring and rack guide spring cap.
a. Apply approximately 2 grams of chassis
grease to the surface of the new…
Get the file Download here
Related Searches:
Comments
Leave a Reply
