POWER STEERING BOX Remove and refit Service tools Drop arm …

Short Description
lg8′ ROVER. The hydraulic pressure gauge in conjunction. with the test adaptor is used for ….. Extract the steering wheel using service tool. 18G 1014. …

Website: islandrover.is | Filesize: 2304kb

Content
POWER STEERING BOX
Remove and refit
Service tools:
Drop arm extractor-MS252A
NOTE: It is important that whenever any part of
the system, including the flexible piping, is
removed or disconnected, that the utmost
cleanliness is observed.
A l l p o r t s a n d h o s e c o n n e c t i o n s s h o u l d b e
suitably sealed off to prevent ingress of dirt, etc.
If metallic sediment is found in any part of the
system, the complete system should be checked,
the cause rectified and the system thoroughly
cleaned.
Under no circumstances must the engine be
started until the reservoir has been filled. Failure
to observe this rule will result in damage to the
pump.
Metric pipe fittings are used with ‘0′ ring pipe
ends on the fittings to the steering box.
Follow normal ‘0′ ring replacement procedure
;. : ;.: .. . whenever pipes are disconnected.
Ensure that compatible metric components are
used when fitting replacement pipes.
CAUTION: PRIOR TO REMOVING ANY OF THE
COMPONENTS INCORPORATED IN THE
STEERING LINKAGE, IT IS IMPERATIVE THAT THE
ROAD WHEELS ARE IN A STRAIGHT…