Power Mac G5 (Late 2004) Hard Drive Screws Replacement …

Short Description
Remove the four guide screws from the sides of the hard drive. (Figure 6). Figure 6 … Installing the Replacement Hard Drive Guide Screws …

Website: manuals.info.apple.com | Filesize: 214kb

Content
073-0851 Rev. A
.
Power Mac G5
Hard Drive Guide Screws
Replacement Instructions
Follow the instructions in this sheet carefully. Failure to follow these instructions could
damage your equipment and void its warranty.
Note:
Online instructions are available at http://www.info.apple.com/installparts/.
Tools Required
The only tool required for this procedure is a Phillips screwdriver.
Opening the Computer
1. Shut down the computer.
Warning:
Always shut down the computer before opening it to avoid damaging its
internal components or the components you are installing. Do not open the computer
or attempt to install items inside it while it is on.
2. Wait 5 to 10 minutes to allow the computer’s internal components to cool.
Warning:
After you shut down the system, the internal components can be very hot.
You must let the computer cool down before continuing.
3. Unplug all external cables from the computer except the power cord.
4. Touch the metal PCI access covers on the back of the computer to discharge any
static electricity from your body.
(Figure 1)
Important:
Always discharge static before you touch any parts or install any
components inside the computer. To avoid generating static electricity, do not…