How to use up to three FIREPODs with Windows XP

Short Description
How to use up to three FIREPOD’s with Windows XP. You can use up to three Firepods on the same system over a … guide you through a single install screen. …

Website: media.zzounds.com | Filesize: 65kb

Content
PreSonus Audio | T. 225-216-7887 | www.presonus.com
How to use up to three FIREPOD’s with Windows XP
You can use up to three Firepods on the same system over a single Firewire connection. In order to use multiple Firepods
together you must first download and install the latest driver, and run the firmware updater included with that driver for
each Firepod. Once the drivers and firmware are up to date, using multiple Firepod’s is easy.
Control Panel:
The control panel includes drop down menus to select
samplerate, latency, and clock source, as well as an Active
Units Panel. Note that the clock source selector will allow
only one unit to sync to SPDIF, as only one SPDIF input
can be used in any multiple Firepod configuration.
Which Unit is Which?:
To determine which position each Firepod is in, you will
need to switch the clock source to SPDIF 1, SPDIF 2, or
SPDIF 3 and look at the Firepods to see which one has a
sync light that is flashing red/blue, indicating that it is
searching for SPDIF sync (make sure no SPDIF
connections are made yet). The number behind each
SPDIF selection refers…