Honda S2000 Hood Q uickLIFT Honda S2000 QuickLIFT Installation Guide

Short Description
Honda S2000. QuickLIFT Installation Guide. This manual is property of Redline Tuning LLC. Any unauthorized duplication or use …

Website: www.redlinetuning.com | Filesize: 3329kb

Content
Please gather the following tools before you begin the
installation:
* Power Drill
* 3/16″ or indexed #11 drill bits
* Fine permanent marker or felt tip pen
* Tape Measure or ruler
* Masking Tape
* Hammer & center punch
* Rivet gun, capable of 3/16″ rivets (most brands can
handle this size)
Note: Only use the rivets supplied in the QuickLIFT kit.
Recommended: Craftsman standard or
Swivel Riveter (shown - 974749) - $9.99 to $17.99
Remove all items from the packing tube. You should have the following before beginning:
* (2) Gas springs (RT-QL-200-A4A) - Be sure to cycle them a few times before installing.
* (4) 3/16″ Multi-grip Rivets - shorter version for hood brackets.
* (4) 3/16″ Multi-grip Rivets - longer headed rivet for the fender brackets.
* (4) Steel brackets - 2 fender, 2 hood.
* Printed Color Instructions
* Gas Spring Locking clips - (Already installed in the gas spring ball ends -
Remove before assembly)
A. Leave your hood closed.
B. Using a piece of masking tape and a permanent marker, carefully measure…