INSTALLATION MANUAL

Short Description
Now you should have an empty XBOX like on the pic-. ture in front of you. Check the bordered chip to be certain. that this manual is the right one for your …

Website: dwl.xbox-scene.com | Filesize: 2251kb

Content
SmartXX v3 no-solder Installation Manual for Microsoft XBOX (Version 1.6) with SmartXX Spider - . SmartXX v3 2003 - 2006 page 1 / 5
INSTALLATION MANUAL SmartXX v3 no-solder w. SmartXX Spider on XBOX V1.6
Power Input (J7)
red: 5V + (DC)
black: GND (Ground)
System Connections (J4)
black: GND (Ground)
green: Emergency Recovery
yellow: Eject Cable
white: LFRAME
purple: D0
IR Remote Output Port (J5)
white: buffered positive signal
black: GND (Ground)
YOUR SmartXX v3: What you need to know first
Read this page carefully before starting work!
FRONTSIDE
BACKSIDE
LPC Bus Connector (J14)
D0-Fan
break away to remove D0-
signal on LPC Bus Connector
Pin4.
Break away unless you are
told the opposite in the manual!
Power-Output (J8)
red: 5V + (DC)
black: GND (Ground)
Status-LED
D0-Recovery pads
If D0-Fan has been removed,
and you need its function
back, it can be recovered by
soldering the D0-recovery
pads.
5V Bridge
Can replace power-cable in
XBOX V1.0-1.5 if 5V + is available
on LPC Bus Connector.
Only in this case both pads
can be soldered together.
USE…