CHEVROLET Prizm 1998-2002 TOYOTA Corolla 1998-2002

Short Description
the face of the Housing). Skip to the. Installation Instruction for ALL VEHICLES on. Page #3. CHEVROLET Prizm 1998-2002. TOYOTA Corolla 1998-2002 …

Website: www.tune-town.com | Filesize: 144kb

Content
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
the ashtray. Unclip the radio trim bezel and
disconnect the wiring. Remove (4) Phillips
screws securing the factory head
unit/cupholder assembly, slide the assembly
out and disconnect the wiring.
Disconnect the negative battery terminal to
prevent an accidental short circuit. Unclip
the radio trim bezel (upper dash). Remove
(4) Phillips screws from the factory head
unit, slide the unit out and disconnect the
wiring. Remove the ashtray and unclip the
trim bezel (lower dash). Remove (4) Phillips
screws from the factory pocket/cupholder
assembly and remove the assembly. (Metra
recommends ordering the 88-00-8000 or
88-00-9000 to fill the space left in the upper
dash location).
Locate the faceplate supplied with the
aftermarket head unit. Place the faceplate
into the recessed opening in the Radio
Housing. If the faceplate fits easily into the
opening with no interference, leave the
Housing intact. If the faceplate does NOT fit
easily into the opening, trim away the ribs
located on the top and bottom of the opening
(”A”).
Locate the faceplate supplied with the
aftermarket head unit. Place the faceplate…