Ford Focus Supercharger System

Short Description
refer to the factory workshop manual for more. detailed instruction on removing the ….. Ford Focus Jackson Racing. Supercharger Belt Length and Routing …

Website: www.mossmotors.com | Filesize: 834kb

Content
Before starting, be sure the vehicle has 91 or
better octane fuel in it. DO NOT try to run the
vehicle at full throttle at sea level altitude with
a supercharger unless the fuel tank is filled
with good 91-octane fuel. Failure to heed this
warning can result in severe engine damage.
Special Note: If you do not have a factory
workshop manual, buy one now! It is good to
have for any repairs now and in the future.
The factory manual is available from Helm
Publications, 800-782-4356.
Tools Needed: 8, 10, 11 (7/16″), 12, 13 (1/2″),
14 (9/16″), 15, 17, sockets and wrenches, a
5mm Allen wrench, Phillips and straight blade
screwdrivers, and a telescoping magnet. You
will also need a #30 Torx bit to remove the
throttle body from the stock intake manifold.
Most of these tools are available at your local
hardware or auto parts store.
This conversion requires the proper compliment
of automotive tools, as well as a solid
knowledge of automotive technical and
mechanical conditions. You should have sufficient
experience with the vehicle type upon
which the conversion is to be performed.
Again, we suggest…