Focus Dead Pedal Installation - 1.ai

Short Description
Ford Focus Dead Pedal Installation Guide. Dead pedal installation completed. http://www.redlinetuning.com/online_manuals.html. This manual is property of …

Website: www.redlinetuning.com | Filesize: 1176kb

Content
Ford Focus Dead Pedal Installation Guide
Please gather the following tools before you
begin the installation:
* Power Drill.
* 3/16 drill bit.
* Large flat head screw driver.
* Large Phillips head screw driver.
* Sharp utility knife or razor blade.
* Fine permanent marker.
* Center punch & hammer - optional.
Remove all items from the the shipped package.
You should have the following before beginning:
* RedlineTuning Focus Dead Pedal
* (2) Washers
* (2) Sheet Metal Screws
* Printed Installation Instructions
A. Carefully remove the inside door trim molding shown below in Figure 3a. It will snap off.
Step 1 - Gather required tools.
Step 2 - Unpack Dead Pedal kit and verify contents.
Step 3 - Remove trim molding and kick panel.
http://www.redlinetuning.com/online_manuals.html
This manual is property of Redline Tuning LLC.
Copyright . 2003 Redline Tuning LLC. All Rights Reserved.
Copyright . 2003 Redline Tuning LLC.
All Rights Reserved.
Copyright . 2003 Redline Tuning LLC. All Rights Reserved. B. Using a flat head
screw driver, remove
the two plastic screws
that hold on the kick
panel (lower left below
Instrument Cluster).
Copyright . 2003 Redline…