Trunk (boot) lid lift for Mazda MX-5 Miata Mk2 (NB, 1999-up)
Short Description
Fitting Instructions for Boot Lid Lifter (K0011). Kit contents. . 1 hydraulic lift arm connected to aluminium support plate. . 1 plastic rectangular spacer …
Website: www.mx5parts.co.uk | Filesize: 102kb
Content
Fitting Instructions for Boot Lid Lifter (K0011)
Kit contents
?1 hydraulic lift arm connected to aluminium support plate
?1 plastic rectangular spacer
?2 bolts
?2 lock washers
Tools required
?1/2 inch open wrench (spanner)
?10 mm socket wrench
?Small flat-bladed screwdriver
?Power drill and 8mm bit for metal (4mm bit recommended as well)
?Support for lid (see step 7)
1. Examine the lift arm. The “thick” end (with the sticker) is terminated with a threaded bolt. This can be detached by removing (with a flat screwdriver blade) the thin metal band. However, this should not be necessary. Do not attempt to compress the lift with your bare hands - it won’t move unless you are very strong. It’s useful to remove the silver-coloured nut and lock washer from the head of the lift before starting.
2. Remove the trunk mat. Unscrew and remove the box in the well on the left of the trunk.
3. Remove the four plastic pop-fasteners which retain the cover of the left-hand side of the trunk lining. (To remove a fastener, insert a…
Get the file Download here
Related Searches: mazda mx 5, lid lifter, screwdriver blade, mx5parts, boot lid
Comments
Leave a Reply
