iPhone Single-Line DECT Cordless Series User Guide

Short Description
iPhone Single-Line DECT Cordless Series User Guide. For Models AC8105S, AC8110S (1.8 GHz) and AC9105S, AC9110S (1.9 GHz). Preparing to Use the AC8100/AC9100 …

Website: www.teledex.com | Filesize: 383kb

Content
iPhone Single-Line DECT Cordless Series User Guide
For Models AC8105S, AC8110S (1.8 GHz) and AC9105S, AC9110S (1.9 GHz)
Preparing to Use the AC8100/AC9100 Series
1. Prepare to install the battery into the cordless handset
by removing the battery cover and sliding it off. If cover is
secured with a screw, remove the screw first.
2. Insert the battery connector into the handset’s connector.
The connector is “keyed” so it only goes in one way.
Do not force the connection.
Note: The handset may “beep” when the battery is
connected. This is not an indication that the telephone
is ready to use. To obtain optimal performance of the
telephone, be sure to charge the battery for 10 to 12 hours.
3. Replace the battery compartment cover and the
retaining screw.
4. Insert the provided rubber screw cover.
5. Turn the telephone base so the back panel is facing you.
Insert either end of the RJ-45 cable into the jack on the
back of the telephone labeled LINE.
6. Insert the other end of the cable into the jack on the AC
adapter labeled PHONE.
7. Insert one end of the RJ-11 line cord…