Audi B5 Platform 1996 - 2002 Engine, removing and installing
Short Description
Note:
All cable ties opened or cut during engine removal must be reinstalled at the same locations.
Remove engine without transmission toward the front.
Drained coolant must be stored in a clean container for disposal or reuse.
Always replace seals and gaskets.
Do not open coolant circulation system.
Website: www.awallacedesigns.com | Filesize: 975kb
No of Page(s): 22
Content
Removing
First determine whether a coded radio is installed. If so, determine the correct coding.
Switch ignition off and disconnect battery Ground (GND) strap.
Remove bolts (arrows) and remove engine covers -A- and -B-.
Remove cover above air filter.
Remove plenum cover.
Remove sound-proofing material (arrows).
Remove bracket for sound-proofing at unit support.
Drain engine coolant => page 19-19
Remove front bumper:
=> Repair Manual, Body Exterior, Repair Group 63
Remove lock carrier:
=> Repair Manual, Body Exterior, Repair Group 50
…
Get the file Download here
Related Searches: sound proofing material, audi b5, engine coolant, carrier repair, circulation system
Comments
Leave a Reply
