Chevrolet New Rear Main Seal and Special Tool for Installation
Short Description
Condition
A new crankshaft rear oil seal and installation tool have been released. This new seal requires that the rear main housing be removed from the vehicle in order to properly install the seal with the new tool.
Website: www.astmtmc.cmu.edu | Filesize: 252kb
No of Page(s): 6
Content
1. Remove oil pan assembly as outline in the appropriate Service Information Manual.
2. Remove the crankshaft rear oil seal housing bolts
3. Remove the crankshaft rear oil seal housing and gasket.
4. Place the crankshaft rear oil seal housing face down on a clean surface and support with blocks of wood
5. Use a suitable driving tool and hammer and lightly tap around the outer edge of the seal to remove it.
6. Clean and inspect the crankshaft rear oil seal housing making sure it is free of any foreign material.
7. With all bolts removed from the housing, place it face up on a flat clean surface.
…
Get the file Download here
Related Searches: pan assembly, oil seal, tool website, installation tool, crankshaft
Comments
Leave a Reply
