INSTALLATION INSTRUCTIONS 02-05 Chevrolet TrailBlazer/GMC Envoy 4.2L
Short Description
Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the instruction manual carefully before proceeding with the installation. Contact AIRAID @ (800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or instructions that are not clear to you. Your PowerAid Throttle Body Spacer was carefully inspected and packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing, please contact AIRAID.
Website: www.jpcustoms.com | Filesize: 101kb
No of Page(s): 2
Content
…
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove throttle body air intake system.
3. Remove (4) nuts & studs from the throttle body and manifold. (Ref. “C”)
4. Install power plate using (4) 6mm x 60mm bolts and (4) 6mm flat washers. (Ref. “C”)
* Please Note: The engraved side of plate faces the throttle body
5. Install (2) extension plates using (2) 6mm flat head screws. (Ref. “D”)
6. Inspect & Test throttle linkage for full open & closed travel before driving. Some cruise or kickdown cables may require adjustment. Please refer to your vehicles service manual for proper adjustment.
…
Get the file Download here
Related Searches: flat head screws, negative battery cable, throttle body spacer, poweraid throttle body spacer, chevrolet trailblazer
Comments
Leave a Reply
