Basic Router Setup for EOT DSL Service
Short Description
Because there are many different manufacturers and models of routers, this guide overviews a basic setup of several types and models of routers. For specific help or troubleshooting regarding a certain router, it is best to check with that router’s manufacturer website or by calling their technical support.
Website: www.eotnet.com | Filesize: 37kb
No of Page(s): 3
Content
1. Power off all devices (router, POE/Wireless Unit, PCs)
2. Using an Ethernet cable, plug one end into the LAN port on the router (These ports are usually labeled 1-4) Connect the other end of the Ethernet cable to the network card on the PC. (If your PC does not have a network card, one will need to be purchased and installed, refer to any included documentation with the network card or the manufacturer’s technical support. If you are installing a wireless router, and aren’t going to run a cable to each PC, you need to install wireless network cards into each PC. Once this is complete you may continue to step 3)
3. Now connect the POE/Wireless Unit to your router. Using another Ethernet cable, plug one end into the 10/100 B-T port on the POE/Wireless Unit.
…
Get the file Download here
Related Searches: wireless network cards, router setup, types and models, cable plug, wireless router
Comments
Leave a Reply
