Samsung AHT-E300 Firmware Update & Router Setup
Short Description
If you are unable to access the modem, check if the modem is connected to your computer (it is recommended that you will do all of the upgrades while the modem is connected directly to the computer). Check if the power and line leds are on. Try to press and hold the reset switch for 10 seconds.
Website: www.geocities.com | Filesize: 516kb
No of Page(s): 15
Content
…
How To Connect a Router Behind The Modem
1. Setup the router to get a dynamic IP address, in this way the modem will “see” the router as a DHCP Client.
2. Get the router to discover the DHCP (usually by pressing “DHCP Renew”)
3. at the modem: Status –> Home
Insure that the modem identifies the router by saying: “Number of Ethernet devices Connected to DHCP server: 1″
4. to pass all of the firewall settings to the router enable the DMZ.
Admin Privilege –> Misc. Configuration
DMZ: Enabled
DMZ HOST IP: 10.0.0.3
5. To open ports do the same as in section 5 but HOST IP ADDRESS: 10.0.0.3
…
Get the file Download here
Related Searches: modem status, open ports, dynamic ip address, ethernet devices, reset switch
Comments
Leave a Reply
