Edimax AR7084gA Wireless ADSL 2+ Modem Router Setup Guide
Short Description
Note: It is recommended to use a computer that connects to the router with a LAN cable to perform the following set up.
Website: www.edimax.co.uk | Filesize: 656kb
No of Page(s): 11
Content
Step 1: Router Configuration
1. To configure the WPA wireless security, open the Internet Explorer, type 192.168.2.1 into the address bar and press Enter.
2. At the User name prompt, type ‘admin’, Password prompt, type ‘1234′ . Click on the ‘OK’ button.
3. The router setup page will be opened. Click on Interface Setup.
4. Then, click on Wireless.
Select:
1. Authentication Type is WPA-PSK
2. Encryption is TKIP
3. Enter your password in Pre-Shared Key. This key must be at least 8 characters and no space in between. Note: This is the key you use to connect to the router wirelessly. eg: 12345678
…
Get the file Download here
Related Searches: wpa psk, modem router, interface setup, authentication type, description note
Comments
Leave a Reply
