LAND ROVER V8 Service Repair Manual

LAND ROVER V8 Service Repair ManualShort Description
CRANKSHAFT PULLEY AND FRONT COVER OIL SEAL - up to 99MY
1. Disconnect battery negative lead.
2. Remove cooling fan. See COOLING SYSTEM, Repair.
3. Slacken 3 water pump pulley securing bolts.
4. Remove alternator drive belt.
5. Remove water pump pulley bolts. Remove pulley.
6. Raise vehicle on four post lift.Remove acoustic cover if applicable. See CHASSIS AND BODY, Repair.
7. Secure LRT-12-080 to crankshaft pulley with 4 bolts.

Website: www.landrover.ee | Filesize: 1402kb
No of Page(s): 56

Content
…
CRANKSHAFT REAR OIL SEAL
Remove
1. Manual Vehicles: Remove flywheel. See this section.
2. Automatic Vehicles: Remove drive plate. See this section.
3. Remove oil seal from location.
4. Ensure both seal location and running surface on crankshaft are clean.
5. Ensure mating faces of flywheel and crankshaft are clean.
6. Lubricate seal guide LRT-12-095 with clean engine oil. Position over crankshaft boss.
…

Get the file Download here

AddThis Social Bookmark Button
Related Books:
  • Copyright Land Rover Owners Club of SA
  • Land-Rover Operation Manual - Part 1/2
  • Front Recovery Capstan Winch Kit Part No. GLR 101 for Land-Rover
  • Workshop Manual covers the Land Rover
  • RANGE ROVER
  • land rover 300tdi motor
  • Range Rover Workshop Manual - LAND ROVER V8
  • Parts Lists For Land Rover Series I, II, IIA &amp III Vehicles …

    • Filed Under Land Rover, Automotive 

    Related Searches: , , , ,



    Comments

    Leave a Reply