Porsche 924 Mainteinace Repairs Adjustments Service Training

Short Description
The recommended service intervals apply under normal driving conditions. If you drive mainly in dusty areas, check the air cleaner more often and replace if necessary. The condition of oil, and wear-and-tear items (such as tires, brakes, clutch lining) depend greatly on the amount of driving and on driving habits. Therefore, oil and wear-and-tear items should be checked more frequently, and if necessary replaced at shorted intervals. Also, the battery electrolyte level should be checked more often. A complete maintenance and lubrication service should be performed at lest once a year, preferably before the winter. The same applies to protective undercoating for the vehicle.

Website: www.myporsche.ru | Filesize: 3972kb
No of Page(s): 30

Content
…Installing camshaft
1. Check camshaft and bearings for wear.
2. Tighten bearing caps 2 and 4 carefully (crosswire).
3. Install bearing caps 1, 3 and 5.
4. Install oil injection tube (for this purpose, release nuts on bearing caps 2 and 4 again)
Important:
When installing the bearing caps, make sure that the bore is not off-center. Before installation, mount bearing caps and determine correct positions.
5. Install and tension toothed belt. For this purpose, set crankshaft pulley and camshaft pulley to the TDC mark.
6. Install ignition distributor.
7. Adjust valve clearance.
8. Check ignition timing and valve timing with strobe light.
…