2004 FORESTER SERVICE MANUAL BODY SECTION
Short Description
This service manual has been prepared
to provide SUBARU service personnel
with the necessary information and data
for the correct maintenance and repair
of SUBARU vehicles.
This manual includes the procedures
for maintenance, disassembling, reassembling,
inspection and adjustment of
components and diagnostics for guidance
of experienced mechanics.
Please peruse and utilize this manual
fully to ensure complete repair work for
satisfying our customers by keeping
their vehicle in optimum condition.
When replacement of parts during
repair work is needed, be sure to use
SUBARU genuine parts.
Website: www.subaru-car.ru | Filesize: 82kb
No of Page(s): 8
Content
…
1. HORN RELAY
Measure the horn relay resistance between terminals (indicated in table below) when connecting terminal No. 4 to battery positive terminal and terminal No. 3 to battery negative terminal.
3. Horn
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the front fog light assembly (LH).
3) Remove the horn bracket mounting bolt (A).
4) Disconnect the harness connector and remove the horn assembly (B).
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
With 12 V direct current supplied between horn terminal and case ground, check that the horn sounds properly.
…
Get the file Download here
Related Searches: subaru service, subaru genuine parts, subaru vehicles, mounting bolt, fog light
Comments
Leave a Reply
