Instructions for 240 Suzuki Hayabusa Swingarm Installation

Short Description
An advanced degree of mechanical skill is required to properly install this kit. If after reading these instructions you have any doubts, we strongly recommend that you have a professional install it for you. If you install the kit yourself, we recommend that you also use the applicable shop manual for your motorcycle. This kit involves significant alterations of your motorcycle and may void your factory warranty.

Website: rccomponents.com | Filesize: 517kb
No of Page(s): 10

Content
…
1.) Stock Component Removal
To begin installing this kit it is necessary to raise the rear end of the bike using a suitable hoist. Be sure to keep the bike centered on the front wheel to keep the bike from tipping over. Once you have the bike lifted and properly secured, begin with the removal of the following stock components (For detailed information on the removal of these parts, please consult you factory manual):
1.) Both mufflers
2.) Left side and lower body panels
3.) Voltage regulator (08 model only)
4.) Front sprocket cover
5.) Chain
6.) Rear Axel, wheel and brake assembly
7.) Pivot tube and swingarm
2.) New Swingarm Installation
A. Begin installation by moving your new swingarm into position. Once you have the swingarm in position reinsert the pivot tube to hold it in place.
B. Next, you will want to reattach the shocks to the underside of the swingarm.
…