Suzuki Adjustable Cam Sprocket Instructions
Short Description
SA-S-750 (GSXR-600 & GSXR-750) Early
SA-S-1300 (GSX1300 R)
The GSXR has a ball bearing behind each cam sprocket. Press the original sprocket off but leave the bearing on. You’ll notice that a line has been stamped on the end of each camshaft at the factory. Line up one of the adapter’s 6mm threaded holes with the line and press the adapter on. Caution: make sure you press the adapter on the right way (with the larger of the two steps facing outwards). Make sure you are pressing the adapter on squarely to the cam. When pressing on an adapter, support the camshaft securely and squarely by the flange behind the ball bearing.
Website: www.mpsracing.com | Filesize: 108kb
No of Page(s): 1
Content
…
Cam Sprocket #SA-S-752 Late model, 2000+ GSXR-600, 750, & 1000
You will need to press off the old sprocket and press on the new sprocket adapter provided. Please note that a line has been stamped on the end of each camshaft at the factory. Take a good look at the end of the cam sprocket and the timing marks before you press off the old sprocket. Make yourself a sketch for reference if you do not have a factory repair manual. You may also want to check the stock cam location with a -degree wheel. You will need to degree in your cam to the new settings after you install the adjustable sprockets.
…
Get the file Download here
Related Searches: 750 gsxr, gsxr 750, degree wheel, 2000 gsxr 600, gsx1300
Comments
Leave a Reply
