Acer Aspire 1400 Series Service Guide

Short Description
This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION decided for Acer’s “global” product offering. To better fit local market requirements and enhance product competitiveness, your regional office MAY have decided to extend the functionality of a machine (e.g. add-on card, modem, or extra memory capability). These LOCALIZED FEATURES will NOT be covered in this generic service guide. In such cases, please contact your regional offices or the responsible personnel/channel to provide you with further technical details.

Website: www.elhvb.com | Filesize: 3657kb
No of Page(s): 118

Content
…
Disassembly Procedure Flowchart
The flowchart on the succeeding page gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the system board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.
…
Removing the Battery Pack
1. Slide the battery latch to the left.
2. Then remove the battery.
Removing the HDD Module/FDD Module/RAM Door and Optical Drive
1. Remove the two screws that secure the HDD module.
2. Then take the HDD module away.
Removing the HDD Module/FDD Module/RAM Door and Optical Drive
1. Remove the two screws that secure the HDD module.
2. Then take the HDD module away.
3. Disconnect the FDD FPC. Then turn out the screw that secure the FDD module. Push the FDD module out.
4. Turn out the four screws on the RAM door. Then remove the RAM door.
Removing the LCD Module/the Power Board and the Keyboard
Removing the LCD Module
1. Remove the two (one on each side) screws holding the LCD antenna covers.
2. Then take away the antenna cover.
3. Open the LCD to an angle of 95 degree from the main unit. Then remove the strip cover (middle cover).
4. Turn out the two screws on the rear panel.One on each side.
5. Then remove the two screws on the button panel. One on the left and the other on the right.
6. Remove the screw that secure the EMI bar. Then remove the EMI bar.
7. Disconnect the coaxial cable connector.
8. Then, you can remove the entire LCD module.
Removing the Power Board and the Keyboard
1. Remove the two screws holding the power board.Then remove the power board.
2. Turn out the two (one on each side) screws that secure the keyboard.
3. Disconnect the keyboard FFC. After disconnect the keyboard connector then remove the keyboard.
…