Mounting instructions for the 123ignition, Alfa Romeo Giulia, Giulia Nuova, Duetto, Spider & Bertone
Short Description
Please read the entire instructions before you begin installation. If after reading you are unsure of the procedure to be followed, please ask someone who knows. Remember to work safely.
Website: www.okp.de | Filesize: 134kb
No of Page(s): 4
Content
…
STEP 1: Find the static timing point
On the old distributor, note the position of the ignition wire to the number one cylinder. Remove the distributor cap and turn the engine in its normal direction so that the rotor almost points to the number one cylinder position. Now carefully turn the engine further until the static timing point is reached. (check the workshop-manual if you are not sure) The engine is now at the static timing point, near the end of the compression stroke for the number one cylinder.
…
STEP 2: Out with the old, in with the new
You may wish to verify that the correct advance curve has been selected in your ‘123′: using a 5mm Allen wrench remove the hexagonal plug in the bottom face of the housing. Inside the hole you’ll find a 16 position rotary switch, marked ‘0′ to ‘F’.
Get the file Download here
Related Products
Alfa Romeo DOHC Engine High-Performance Manual (Speedpro)
Alfa Romeo Giulia - Spider Owners Workshop Manual 1962-1978 (Autobook Series of Workshop Manuals)
Alfa Romeo Giulia Coupe GT and GTA (Car & Motorcycle Marque/Model)
Alfa Romeo Giulia 1750, 2000 1962-1978 Owners Workshop Manual
Glenn’s Alfa Romeo Repair & Tune-up Guide: Performance & Mechanical Specifications: All Giulietta, Early Giulia (2000, 1600) (Workshop Manual Alfa Romeo)
Related Searches:
Comments
Leave a Reply
