Phantom Roadster Instruction Manual - Optional Wiring
Short Description
This section deals with some of the optional wiring that may be needed depending on how you choose
to construct your car.
Website: www.lambobuilder.com | Filesize: 812kb
No of Page(s): 8
Content
OEM Tail light connections to Fiero harness
The following diagram shows the stock Fiero Harness. It utilizes more lights than the Lamborghini. The second diagram show the modifications that will be necessary to eliminate the extra lights and make the necessary connections to the OEM Lamborghini tail lights as well as how the third brake light can be connected.
Lets take each item separately.
1. Add a new relay
It is necessary to add a third relay to control the brake lights. Tap into the orange wires that come from the existing two relays to the power side of the new relay. Cut the white wire from the brake switch and run it to the new relay. Cut the Yellow and Green wire that go to existing brake light/turn signals. Connect them along with a third wire for the center brake light to the relay that is powered by the activation of the brake.
…
Get the file Download here
Related Products
The Lamborghini Miura Bible
Lamborghini: Supercars from Sant’Agata (Haynes Classic Makes)
Lamborghini: The Spirit of the Bull (Cars)
Lamborghini Countach: The Complete Story (Crowood Autoclassics Series)
Road and Track on Lamborghini, 1964-85 (Brooklands Road Tests)
Lamborghinis (High Performance)
Related Searches: lamborghini countach, phantom roadster, lamborghini miura, sant agata, road and track
Comments
Leave a Reply
