Service Manual Nokia 5210 NSM-5 Service Level 1
Short Description
The purpose of this document is to give Nokia service level 1 workshops aids to carry out service for 5210. The use of this Service Manual is only for Nokia authorized service partners additionally to other service documentation like Service Bulletins. While every endeavor has been made to ensure the accuracy of this document, some errors may exist. If you find any errors or if you have further suggestions, Nokia should be notified. Please keep in mind also that this documentation is continuously being updated and modified, so watch always out for the newest version.
Website: www.wahanaponsel.com | Filesize: 2435kb
No of Page(s): 19
Content
…
4. DISASSEMBLY INSTRUCTIONS
To open the unit the A-Shell has to be removed first. Press the grip markings on both sides of the B-Shell and pull the A-Shell apart from the B-Shell.
Now, press the release springs near the display and pull the unit out of the B-Shell.
Remove the six screws with screwdriver Torx T6 in the shown order. When assembling the reverse order has to be taken with torque of 17Ncm.
Now the LCD module can be removed easily.
All the connectors are located under the CMT module. Take care that the RF Gasket stays in position on the four guiding pins. If the gasket is bent it has to be changed.
The SIM Connector can be removed with tweezers.
…
Get the file Download here
Related Books:Related Searches: nokia service level, torx t6, manual nokia, cmt, service bulletins
Comments
Leave a Reply









