Nokia 1661/1662 User Guide
Short Description
This phone is intended for use with the BL-4C battery.
Safe removal. Always switch the device off and disconnect the charger before removing the battery.
1 Slide the back cover downwards (1), and remove it.
2 Lift the battery, and remove it (2).
3 Insert the SIM card (3). Ensure that the gold-coloured contact area is facing down and the bevelled corner of the SIM card is slided in next.
4 Replace the battery and back cover (4, 5).
Website: www.tadaustconnect.org.au | Filesize: 236kb
No of Page(s): 14
Content
…
Charge the battery
Your battery has been partially charged at the factory. If the device indicates a low charge, do the following:
1 Connect the charger to a wall outlet.
2 Connect the charger to the device.
3 When the device indicates a full charge, disconnect the charger from the device, then from the wall outlet.
Tip: To save energy, unplug the charger when the battery is fully charged.
You do not need to charge the battery for a specific length of time, and you can use the device while it is charging. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made.
…
Get the file Download here
Related Searches: sim card, short description, length of time, bl, nokia
Comments
Leave a Reply
