2005-2008 Toyota Tacoma Exhaust System Installation
Short Description
Precision manufactured using aircraft quality T-304 stainless steel; this system is designed to endure years of heavy use. Installing a Borla Performance Exhaust System on your vehicle will eliminate the restrictive design of the stock exhaust, allowing your engine to discharge exhaust gas easier. The result is more horsepower and torque, longer engine life, and a distinctive throaty growl- all this, with easy bolt-on installation. These installation instructions have been written to help you in the installation of your Borla Performance Exhaust System. Please read it completely before installing your system.
Website: www.borla.com | Filesize: 1611kb
No of Page(s): 4
Read more
TOYOTA TACOMA - Idle Control System Malfunction
Short Description
The rotary solenoid type IAC valve is located in front of the intake air chamber and intake air bypassing the throttle valve is directed to the IAC valve through a passage. In this way, the intake air volume bypassing the throttle valve is regulated, controlling the engine speed.
Website: www.parksoffroad.com | Filesize: 18kb
No of Page(s): 4
Read more
TOYOTA TACOMA - Evaporative Emission Control System Leak Detected
Short Description
The vapor pressure sensor, VSV for EVAP, VSV for canister closed valve (CCV) and VSV for pressure switching valve are used to detect abnormalities in the evaporative emission control system. The ECM decides whether there is an abnormality in the evaporative emission control system based on the vapor pressure sensor signal.
Website: www.tankota.net | Filesize: 115kb
No of Page(s): 14
Read more
2005 TOYOTA TACOMA REPAIR MANUAL - LIGHTING - LH HEADLAMP ASSY
Short Description
ADJUSTMENT
1. VEHICLE PREPARATION FOR HEADLAMP AIM ADJUSTMENT
(a) Prepare the vehicle:
- Ensure that there is no damage or deformation to the body around the headlamps.
- Fill the fuel tank.
- Make sure that the oil is filled to the specified level.
- Make sure that the coolant is filled to the specified level.
- Inflate the tires to the appropriate pressure.
- Place the spare tire, tools, and jack in their original positions.
- Unload the trunk.
- Sit a person of average weight (68 kg, 150 lb) in the driver’s seat.
Website: www.tundrasolutions.com | Filesize: 52kb
No of Page(s): 5
Read more
TOYOTA TACOMA FRONT HITCH INSTALLATION
Short Description
1. Remove 2 bolts, one from each end of front bumper beam. Pull out end caps and return to customer.
2. Place 4″ carriage bolt through spacer(CM-SP4) and into existing holes from the inside of the frame (both sides).
Website: sitepro12.sitepro.com | Filesize: 142kb
No of Page(s): 2
Read more
Toyota Tacoma Technical Service Bulletin - Front Cowl Water Leak Repair Procedure
Short Description
Use the following field–fix procedure if water is present on the floor carpeting and it can be confirmed that the leak is from the front cowl seam.
Website: www.customtacos.com | Filesize: 55kb
No of Page(s): 4
Read more
LEDayLine Daytime running light Installation guide - Golf V
Short Description
Before starting the installation, please ensure the suitability of your chosen mounting position on the vehicle. The installation height and width of the daytime running lights is prescribed exactly by the FMVSS. Detailed information can be found in the installation instructions supplied as part of the kit.
Website: www.hella.com | Filesize: 375kb
No of Page(s): 4
Read more
