Suzuki GSX-R 400 Specification
Short Description
The GSX-R400 (initially called GSX-R in Japan, internal model code GK71B) was released in March 1984. It was the first mass-produced light-weight racer replica with an aluminum cradle frame and a liquid-cooled inline-four DOHC engine with four valves per cylinder. The, in those days, amazing machine was based on Yoshimura’s TT-F3 racer GS1000R. The competitors, Yamaha FZ400R and Honda CBR400R were 13—31 kg (29—68 lbs) heavier than the new and quick GSX-R
Website: www.manualz.info | Filesize: 656kb
No of Page(s): 11
Read more
Running Light Conversion Brake Override 4-Way Emergency Flash Installation Guide
Short Description
signalMinder is a 100% solid-state device, which replaces the existing turn signal relay of your bike - in many cases this a simple plug-in procedure. But depending on your bike, you may need additional hook-up.
Website: www.kisantech.com | Filesize: 1715kb
No of Page(s): 38
Read more
SUZUKI WINCH MOUNT KIT Installation Instructions
Short Description
When using the winch to raise and lower a blade a cable stop must be installed. Carefully raise the blade until the top of the push tube’s are no closer than 1” anywhere on the ATV. Place the Cable Stop onto the Winch Cable up against the Winch Hawse. Secure the Cable Stop to the Winch Cable using the Cable Clamp Assembly as shown in the pictures below.
Website: www.masterlockatvwinch.com | Filesize: 904kb
No of Page(s): 6
Read more
Suzuki 03-04 GSX-R1000 TiForce exhaust system
Short Description
Thank you for selecting and purchasing a TiForce exhaust system for your ‘ 03-’04 GSX-R1000. TiForce is the world’s finest titanium exhaust system available today. Please read the following instructions and materials to fully familiarize you with new exhaust system before getting started.
Website: www.tiforce.com | Filesize: 408kb
No of Page(s): 4
Read more
Adjustable foot peg kit for Suzuki GSX-R1000 Users Manual
Short Description
To prevent burns, work must be conducted only after the engine has properly cooled down. To ensure the bike does not fall over as you work on it, make sure it is stood on level ground. During the installation of the kit make sure that all parts are securely tightened to prevent from falling plate or loose master-cylinder. Pay special attention to the brake system, errors can cause serious injury. After installation, make sure that the parts of the kit are not touching other parts. Some parts are loosely tightened at the time of shipment. Please make sure all parts are securely tightened during the installation.
Website: tiforce.com | Filesize: 101kb
No of Page(s): 3
Read more
Suzuki introduces an all new lightweight 25PS (18.4kW) Four-Stroke Outboard
Short Description
Suzuki engineers have designed an all-new light weight 25PS (18.4kW) 4-stroke outboard that weighs just 69kg (152lbs.)*. Its lighter weight and economical operation make it ideal for boaters and fishermen who need a powerful compact outboard. In addition, this new 4-stroke fully complies with 2006 EPA and forthcoming EURO 1 standards (EU Directive 2003/44/EC), and carries the California Air Resources Board (CARB) 3-star Ultra-Low emissions rating.
Website: 202.148.140.153 | Filesize: 245kb
No of Page(s): 2
Read more
SUZUKI / GSX-R600/750 / 2006-2007 Slip-On System Installation
Short Description
Installation Instructions
1 After bike is cool make sure the bike is secured before beginning the installation.
2 Remove the right side lower fairing bolts and pull the fairing out from the push pin/rubber connector.
3 Fully loosen the muffler clamp from the header collector.
4 Remove the 3 muffler mounting bolts (2 on the right side, 1 on the left side).
Website: www.leveloneracing.com | Filesize: 1028kb
No of Page(s): 5
Read more
