The Audi RS 6 Service Training Manual

The Audi RS 6 Service Training ManualShort Description
The arrival of the Audi RS6 has given a whole new meaning to the term “vehicle dynamics.” As was the case with the Audi RS4, the new top model in the Audi A6 Series was conceived by Audi’s star designers at quattro GmbH and developed in conjunction with Audi AG. The quattro four-wheel drive Audi RS6 has a 4.2-liter V8 engine with two turbochargers, five valves per cylinder and twin charge air cooling. With 450 hp, 415 lb/ft of torque, Tiptronic 5- speed automatic transmission, and a sport suspension, the RS6 has the agility of a sports car, accelerating from 0 to 60 mph in 4.6 seconds (0-100 km/h in 4.9 seconds). Adding to the sporty feel and appearance of the RS6 are the Formula 1-style Tiptronic shift “paddles” on the steering wheel.

Website: www.s4-mtm.com | Filesize: 6704kb
No of Page(s): 60
Read more

Volvo Penta Workshop Manual Marine diesel engines MD6A, MD7A

Volvo Penta Workshop Manual Marine diesel engines MD6A, MD7AShort Description
This workshop manual contains technical specification, descriptions and instructions for repairing the standard versions of the following engines TAMD31M, TAMD31L, TAMD31P, AD31L, AD31P, KAD32P, TAMD41H, TAMD41M, TAMD41P, AD41P, TAMD42WJ, KAMD42A, KAMD42B, KAMD42P, KAD42A, KAD42B, KAD42P, KAMD43P, KAD43P, KAMD44P, KAD44P. The workshop manual displays the operations carried out on any of the engines above. As a result the illustrations and pictures in the manual that show certain parts on the engines, do not in some cases apply to all the engines listed above. However the repair and service operations described are the same in all essential details. Where they are not the same this is stated in the manual and where the difference is considerable the operations are described separately. Engine designations and numbers are given on the number plate (See Workshop manual Group 21 Engine page 15). The engine designation and number should be given in all correspondence about the engine.

Website: www.capedory.org | Filesize: 1610kb
No of Page(s): 44
Read more

SUZUKI / GSX-R600/750 / 2006-2007 Slip-On System Installation

SUZUKI / GSX-R600/750 / 2006-2007 Slip-On System InstallationShort Description
Installation Instructions
1 After bike is cool make sure the bike is secured before beginning the installation.
2 Remove the right side lower fairing bolts and pull the fairing out from the push pin/rubber connector.
3 Fully loosen the muffler clamp from the header collector.
4 Remove the 3 muffler mounting bolts (2 on the right side, 1 on the left side).

Website: www.leveloneracing.com | Filesize: 1028kb
No of Page(s): 5
Read more

Second Gen (2003+) SV650 Fork Spring, Damper Rod Kit Installation Instructions

Second Gen (2003+) SV650 Fork Spring, Damper Rod Kit Installation InstructionsShort Description
WARNING: Undertake this at your own risk. This document is correct to the best of my knowledge, but I take no responsibility in how this information may be used. - wegster on SVRider.com
DANGER! Fork springs are under pressure. Always observe proper shop safety techniques, and always wear safety glasses. Common sense is expected, and these instructions are meant to be guidelines only – if in doubt, ask for help!

Website: wawatusi.com | Filesize: 1811kb
No of Page(s): 13
Read more

SUZUKI 800 VOLUSIA Adaptor Kit Installation Instructions

SUZUKI 800 VOLUSIA Adaptor Kit Installation InstructionsShort Description
Congratulations on your purchase of the SUZUKI 800 VOLUSIA Adaptor Kit. We’re sure you’ll be pleased with the new level of performance you’ll experience. This kit should be installed on bikes with After Market Exhaust Pipes only and jetted, (not included). We recommend that an experienced mechanic perform this conversion. Use the appropriate Suzuki service manual for reference to complete jetting of carbs.
Remember, gasoline is extremely flammable and can be explosive under certain conditions. Work in a well-ventilated area and clean up any spills immediately. Check for leaks before riding.

Website: www.thundermfg.com | Filesize: 123kb
No of Page(s): 2
Read more

SUZUKI LTR450 Fuelpak Installation Instruction

SUZUKI LTR450 Fuelpak Installation InstructionShort Description
To achieve the optimum performance from your application, it is recommended that you install a high performance air filter in conjunction with this unit. Fuelpak will be installed in-line with the factory injector wiring harness and the throttle position sensor. The unit will be mounted under the seat.

Website: www.fuelpakfi.com | Filesize: 216kb
No of Page(s): 2
Read more

Volkswagen Passat B6 - Wheel bearings, assembly overview

Volkswagen Passat B6 - Wheel bearings, assembly overviewShort Description
Wheel bearings, assembly overview
- Multi-point socket head bolt
- Tip of bolt must point in direction of travel
- Left Front ABS Wheel Speed Sensor G47 / Right Front ABS Wheel Speed Sensor G45
- Can be checked in Guided Fault Finding using Vehicle Diagnosis, Testing and Information System VAS 5051

Website: volkswagen.msk.ru | Filesize: 271kb
No of Page(s): 9
Read more

Next Page →