Installation Guide for the Torrel Disc Brake Conversion for Series II, IIA, and III Land Rovers

Installation Guide for the Torrel Disc Brake Conversion for Series II, IIA, and III Land RoversShort Description
Installing the Torrel disc brake system in a Series Land Rover is a straight forward process. The existing front drum brakes are removed and the disc brakes are installed using the stub axle bolts that hold the original drum brake backing plate in place. No other modifications to the vehicle are required. The disc brake conversion can be fitted to any Series II, IIA or III Land Rover equipped with 16 inch rims (wheels). The disc brakes work well with the early Series Land Rover single line brake master cylinder (without vacuum assist) although the brake pedal pressure required to stop may be slightly greater than that required with the original drum brake system. The Torrel system also works well with the dual master cylinder, vacuum assist systems supplied on Series Land Rovers from 1970 onwards. The dual line system is a significant improvement to the single line system.

Website: expeditionlandrover.info | Filesize: 1701kb
No of Page(s): 11
Read more

Second Gen (2003+) SV650 Fork Spring, Damper Rod Kit Installation Instructions

Second Gen (2003+) SV650 Fork Spring, Damper Rod Kit Installation InstructionsShort Description
WARNING: Undertake this at your own risk. This document is correct to the best of my knowledge, but I take no responsibility in how this information may be used. - wegster on SVRider.com
DANGER! Fork springs are under pressure. Always observe proper shop safety techniques, and always wear safety glasses. Common sense is expected, and these instructions are meant to be guidelines only – if in doubt, ask for help!

Website: wawatusi.com | Filesize: 1811kb
No of Page(s): 13
Read more

GR-40 Bump Steer System Installation Instructions

GR-40 Bump Steer System Installation InstructionsShort Description
Bump steer is the racer’s name for toe-change during suspension travel. You may not know it, but if you have lowered your car, you have a bump steer problem. Offset rack bushings may help, but adjusting bump steer is like adjusting ignition timing, it must be tuned for each car. The Griggs Racing bump steer kit makes it possible for you to tune the bump-steer out of any Mustang.

Website: www.griggsracing.com | Filesize: 20kb
No of Page(s): 2
Read more

2006 Suzuki Grand Vitara

2006 Suzuki Grand VitaraShort Description
2007 Suzuki Forenza and Forenza Wagon … Manual transmission:. 23 mpg/city and 30 mpg/highway (sedan). Automatic transmission: …

Website: www.media.suzuki.com | Filesize: 27kb
Read more

Porsche 996 C2Front Installation Manual98-788-1470Rev. A12-01 …

Porsche 996 C2Front Installation Manual98-788-1470Rev. A12-01 ...Short Description
Porsche 996 C2 front kit, and 59.65 for the Porsche 997 Carrera 2S front kit. … included in this manual. If you have any questions, please contact the …

Website: www.stoptech.com | Filesize: 1193kb
Read more

Suzuki SX4 Technical Specifications

Suzuki SX4 Technical SpecificationsShort Description
2007 Suzuki SX4 Technical Specifications. Page 2 of 3. ALL-WHEEL-DRIVE SYSTEM … AWD, manual transmission: 2849 - 2904 lbs. (1295 - 1320 kg) …

Website: www.media.suzuki.com | Filesize: 29kb
Read more

H2 SUV

H2 SUVShort Description
Refer to your Owners Manual for details, including reservation of rights, … for your HUMMER, except the GM Officially Licensed Products (see below). …

Website: www.carbase.com | Filesize: 610kb
Read more

Next Page →